Yes it is n i have one of them.I just learned something. I didn't know T/C made a .45 Hawken. Is it 15/16ths across the flats like the .50 & .54? 1:48 twist rate?
I'm glad you posted this. That would be neat to own.
The REAL conicals come in 200 n 250 gr, they are short n don't need a large powder charge to make them work well. In fact you can over powder them. I would say in a .45 don't use over 75 gr. 45-65 would get good accuracy. I have couple hundred cast n shoot them a lotHello, I’m looking for a good conical or Maxi ball type bullet for my T/C Hawken.45 kit. Patched LRB are accurate but I just want to use them for target/ steel. Any input would be appreciated. Thanks.
Yes. Same barrel diameter and twist as the .50 caliber.I just learned something. I didn't know T/C made a .45 Hawken. Is it 15/16ths across the flats like the .50 & .54? 1:48 twist rate?
I'm glad you posted this. That would be neat to own.
As do I. After seeing Jeremiah Johnson had to have a Hawken. The .50 was not available but the .45 was at the local sporting goods store. Shoots 3/4 inch groups @ 50 yards with PRB over 70 gr Pyrodex Select and original iron sights. Eyes betraying me so irons replaced with a mid-Soule vernier and Hadley cup as well as front globe w/ spirit level ala Lee Shaver this winter. Have also acquired some real BP so excited to try out my "new rig" when snow depth recedes a bit. Looking to improve group and carry out to 100 yrds and moreYes it is n i have one of them.
I own a .54 T/C Hawken with 1" across the flats, but I read it was discontinued and all .50s & .54sThe 54 uses a 1" across the flats.
I make Max s in pure and lube bottom groove only and it sits on a Dura Felt wad (dry) over 80 gr OE 2F and it works great!/EdHello, I’m looking for a good conical or Maxi ball type bullet for my T/C Hawken.45 kit. Patched LRB are accurate but I just want to use them for target/ steel. Any input would be appreciated. Thanks.
The .45 with a conical is all you need for deer plus its easier on the shoulder. (lighter bullet generally and more weight). I'll likely be casting some towards the end of May when I get back up north. I have a .45 Maxiball mold and I can cast you some if you'd like.. Drop me a PMAs do I. After seeing Jeremiah Johnson had to have a Hawken. The .50 was not available but the .45 was at the local sporting goods store. Shoots 3/4 inch groups @ 50 yards with PRB over 70 gr Pyrodex Select and original iron sights. Eyes betraying me so irons replaced with a mid-Soule vernier and Hadley cup as well as front globe w/ spirit level ala Lee Shaver this winter. Have also acquired some real BP so excited to try out my "new rig" when snow depth recedes a bit. Looking to improve group and carry out to 100 yrds and more
Dixie Gun Works offers a 45 Maxi
PM sent.The .45 with a conical is all you need for deer plus its easier on the shoulder. (lighter bullet generally and more weight). I'll likely be casting some towards the end of May when I get back up north. I have a .45 Maxiball mold and I can cast you some if you'd like.. Drop me a PM
I have a .45 T/C Hawken as well.I just learned something. I didn't know T/C made a .45 Hawken. Is it 15/16ths across the flats like the .50 & .54? 1:48 twist rate?
I'm glad you posted this. That would be neat to own.
Enter your email address to join: