- Joined
- Jan 12, 2019
- Messages
- 146
- Reaction score
- 37
Hmmmmm, not sure. I will check that out as I do have the original that came with the gun. Thanks A
I had the same problem as Toot, fixed it by gluing a small piece of thin leather in the ramrod channel.
~WH~
Boiled linseed oil about 6-8 coats let dry a day or two between coatsReminds me of the time, back in 1982, when I discovered I had a stuck ramrod at the start of a hunt with an unloaded rifle. I was out in the middle of nowhere and there wasn't much I could do about it.
While we're on the subject, what kind of "finish" should be applied to prevent this problem?
I recommends against straightening your ramrod. On several of my rifles the slight curvature of the ramrod is what keeps the rod in place. I do recommend sanding and thorough sealing, then an occasional wipe with floor wax.
Boiled linseed oil about 6-8 coats let dry a day or two between coats
Enter your email address to join: