- Joined
- Sep 29, 2023
- Messages
- 367
- Reaction score
- 789
Lol and you thought you were done with all that stuffffDiapers, baby shark and Spider-Man are getting in mine
Lol and you thought you were done with all that stuffffDiapers, baby shark and Spider-Man are getting in mine
After sending a bunch of rounds downrange, I heard a little voice in my head say "Check the flash hole liner stupid!" The .036 pin gauge dropped right through. Lesson learned. XI'm running carbide at .036 " Im checking the hole every time I clean the plug. It isn't moving so far.
Nice! That 200 yd. target will be tough to beat. XFirst time this year on the club range for a 200yd postal...........
View attachment 43375
View attachment 43374
Just for giggles........ I sent 5 at 600yds before leaving for home. My target came off the backboard after my first shot GRRRRRRRRRR.
I seen another target hanging there and knowing it wouldn't have been shot with a 45cal, sent the next 4 rounds.
View attachment 43377
View attachment 43379
Glad you’re okI have got to get out of this State. My cargo trailer i live almost flipped over last night. Winds up as high as 70 mph hit us a direct hit. Was not a good feeling. Been up most of the night.
I have no clue how many rounds I've sent through my ASG plug, but its right at .034" tight.After sending a bunch of rounds downrange, I heard a little voice in my head say "Check the flash hole liner stupid!" The .036 pin gauge dropped right through. Lesson learned. X
Thats some Dam good shooting ! Better then some with center fire.50-5X
Hot tip. Make sure that your flash hole liner isn't burnt out BEFORE you waste a lot of bullets and powder! X
Good to know that you're ok.It's been windy & raining as always. Day later & my winds will gust to 40 mph today. Not trying today either
I like the target you made very much ! I printed it in portrait and it dropped the size of the target to 4 in. ! Great for center fire shooting ! Thank you.The printable target
Print on 8x11 standard printer paper in landscape setting on your printer.
Thanks, a lot! For the info. Mnt monkey! much appreciated ! Don't have any Remington 700 actions, are there any other options ?Sorry for the confusion and lack of proof reading,.125 shank for 4 inches allows you to shoot much hotter loads the barrel nut is .120 diameter it's still gives you plenty of barrel especially for shooting like you're witnessing
Arrowhead often has built 45's in stock. Might want to check. If not, they have barrels and actions, but a smith will need to do some work, unless you're capable.Thanks, a lot! For the info. Mnt monkey! much appreciated ! Don't have any Remington 700 actions, are there any other options ?
Gotcha! I will check the website & take a look. Thank you! Could you build one using a Thompson Encore ?Arrowhead often has built 45's in stock. Might want to check. If not, they have barrels and actions, but a smith will need to do some work, unless you're capable.
https://arrowheadrifles.com/product-category/in-stock-builds/
There are a number of other custom builders that could build you a rifle. However, know that most are very busy and it may take well over a year, even two.
THERE'S NO BOTTOM TO THE RABBIT HOLE !!!
Yes. Luke has replacement barrels.Gotcha! I will check the website & take a look. Thank you! Could you build one using a Thompson Encore ?
Thanks for the info. Arrowhead has some beautiful rifle builds. I especially like the Arrowhead Obsidian, but price is a little stiff, I would buy it but wouldn't be able to shoot it, because my wife would shoot me ! But beautiful guns. I'm going to look into this farther & see what I can Come up with. Thanks for your help.Arrowhead often has built 45's in stock. Might want to check. If not, they have barrels and actions, but a smith will need to do some work, unless you're capable.
https://arrowheadrifles.com/product-category/in-stock-builds/
There are a number of other custom builders that could build you a rifle. However, know that most are very busy and it may take well over a year, even two.
THERE'S NO BOTTOM TO THE RABBIT HOLE !!!
IMO.......... just a couple things to think about when going SML.Gotcha! I will check the website & take a look. Thank you! Could you build one using a Thompson Encore ?
Enter your email address to join: