Knight Disc Ring Options

[birdog]

I am looking for confirmation that the Remington 540/541 two piece rings will fit the Knight Disc. I am hoping someone has first hand confirmation. I am looking at the Talley's that will allow me to mount the rings 180 deg either way to create a little less eye relief. These Tally's will only give me about 1/4" but coupled with the shorter Knight laminate stock I just purchased this will get me very close to where I need to be.

Tally offers these rings for the Knight Disc but only for a 1" tube and I have a 30mm tube. I can get the Remington 540/541 in 30mm.
Remington 540 Scope Mounts

 

[GM54-120]

Is there a reason these wont work? Both have the same ring spacing of .500
https://www.talleymanufacturing.com/product/knight-muzzleloader-scope-mounts/

 

[birdog]

GM those are for 1" tubes. I emailed Talley and was told they do not offer that ring set in 30mm.

 

[GM54-120]

All i can tell you is Rem541 bases from Warnes/Weaver/Loopie/ect fit Knight round tops too. So i would wonder why the Talley isnt listed to fit both?
https://www.midwayusa.com/product/1592179769
https://www.leupold.com/media/manuals/base_ring_fit_guide_2021.pdf

 

[birdog]

Gm thank you! You, along with that Leupold link confirms the Remington 541 base will work on my Knight.