- Joined
- Dec 24, 2009
- Messages
- 15,022
- Reaction score
- 6,884
After roughly 50 shots not bad and the breach cleaned up very easy. No hard carbon in the breach, NFPJ Adapter or bolt face. The soot wiped off very easily.
The only harder carbon was in the primer pocket and almost all was at the bottom. You can make out the slight primer crush ring in the residue.
These pics are with no cleaning at all, not even the primer pocket since it worked fine all day. My normal cleaning time was cut nearly in half vs the FPJ.
:yeah:
BTW now i am convinced the Montana Exrteme Bore Conditioner does make clean up easier. Barrel residue is noticeably easier to remove and first shot point of impact is far better.
The only harder carbon was in the primer pocket and almost all was at the bottom. You can make out the slight primer crush ring in the residue.
These pics are with no cleaning at all, not even the primer pocket since it worked fine all day. My normal cleaning time was cut nearly in half vs the FPJ.
:yeah:
BTW now i am convinced the Montana Exrteme Bore Conditioner does make clean up easier. Barrel residue is noticeably easier to remove and first shot point of impact is far better.