- Joined
- Sep 5, 2022
- Messages
- 46
- Reaction score
- 82
Hey folks...
After installing my Badger Ridge Bolt/Breech conversion, I carefully loaded 70gr BY WEIGHT BH 209 powder followed by a wonder wad then topped with a 300gr .452 Dia XTP inside a black HPH-24 Sabot. Fit was tight but not a big struggle to seat.
I had a Nikon P-223 2.5x8x36mm optic on hand that wasn't being used, 1/4 moa adjustment. Even though I carefully weighed each charge prior to shooting, my accuracy was lacking. I checked scope base/rings, even forearm screw to see if anything was loose. Would I benefit by reducing my charge? Any and all help would be greatly appreciated!
Many thanks,
Shadowfox64
After installing my Badger Ridge Bolt/Breech conversion, I carefully loaded 70gr BY WEIGHT BH 209 powder followed by a wonder wad then topped with a 300gr .452 Dia XTP inside a black HPH-24 Sabot. Fit was tight but not a big struggle to seat.
I had a Nikon P-223 2.5x8x36mm optic on hand that wasn't being used, 1/4 moa adjustment. Even though I carefully weighed each charge prior to shooting, my accuracy was lacking. I checked scope base/rings, even forearm screw to see if anything was loose. Would I benefit by reducing my charge? Any and all help would be greatly appreciated!
Many thanks,
Shadowfox64