Encore Pro Hunter owners, what is your experience with different loads? Name your best load including primer, powder, sabot, and bullet...also please include where your groups start to scatter with too much powder or bullet. Thanks!!!
TC Pro-Hunter loads
- Thread starter Cordwood
- Start date
Help Support Modern Muzzleloading Forum:
Encore #1 .50...110 grains of BH-209... 200 gr shock-wave.
Pro Hunter #1...105 grains of BH-209...200 gr shock-wave.
Pro Hunter #2...100 grains of Bh-209...200 gr shock-wave
Endeavor #1...105 grains of BH-209....200 gr. shock-wave.
Chocdog
Pro Hunter #1...105 grains of BH-209...200 gr shock-wave.
Pro Hunter #2...100 grains of Bh-209...200 gr shock-wave
Endeavor #1...105 grains of BH-209....200 gr. shock-wave.
Chocdog
Pro Hunter........... 3 50gr. pyrodex pellets,or 120grs. loose T7 2f, 250gr. SW with supplied sabot,federal 209A primers. Gun consistantly shoots 1 1/4-1 1/2 inch groups at 100yds. Both loads shoot to the same POI. The reason I shoot these loads is,1. I hunt on long fingers of brush on open bean/corn fields where long shots are the norn 100-200yds. 2. I use a Nikon with BDC,and these loads shoot spot on with the ballistic plex at the measured yardages 100,150,200,225,250. The farthest I've taken a deer with this load is 164yds,but it was nice to range him,then just use the correct "hold over". 
Ron
RonSimilar threads
