- Joined
- Apr 2, 2007
- Messages
- 1,421
- Reaction score
- 295
A couple of months ago I picked up some Harvester H5445R sabots in Cabala's bargain cave. Now I don't have a .54 caliber rifle with a rate of twist suitable for sabots, but for $1.50 I just couldn't let that lonesome pack of sabots sit there on the shelf.
Anyway, just for kicks during my Sunday morning shooting session with the .54 Great Plains flintlock I decided to give those sabots a try in the gun's 1:60 twist. I loaded them with .452/250 grain Hornady XPTs. These bullets are 0.664 in length and were the shortest .45 caliber bullets I had in the bullet bag.
I shot only five of them at fifty yards (target below). The group wasn't real tight, but I was a little surprised at how well they did do. I may have to play around with them again with different powder charges and see what happens.
Have any of you guys tried sabot loads in a slow twist barrel?
Anyway, just for kicks during my Sunday morning shooting session with the .54 Great Plains flintlock I decided to give those sabots a try in the gun's 1:60 twist. I loaded them with .452/250 grain Hornady XPTs. These bullets are 0.664 in length and were the shortest .45 caliber bullets I had in the bullet bag.
I shot only five of them at fifty yards (target below). The group wasn't real tight, but I was a little surprised at how well they did do. I may have to play around with them again with different powder charges and see what happens.
Have any of you guys tried sabot loads in a slow twist barrel?