To Tap.......Or Not To Tap!!??

[pinks]

When you guys are measuring BP, do you tap the powder in the measure or do you just fill and cut the top?

Perry

 

[Nimrodder]

You can do it either way. Just do it the same way every time.

 

[rjhans53]

because you put it in a form of a question, I pour slightly over full, tap on the side of the measure 10 times and close the spout (leveling the load) of my see threw and pour it in.

 

[cayuga]

with the cut off funnel I do not tap. With the open powder measure, I shake the top off, but do not tap.

 

[Mark whiz]

I use a cut-off type measure also. I over fill slightly, tap once, then slice off the extra and load.

 

[Bucker]

fill

I overfill w/ the TC Uview and then tap twice then w/ the top push excess to the box lid I load my Lanes Tubes over.

 

[Underclocked]

The only thing that matters about method chosen is that you use the same method each time.

I use 5.

 

[toytruck]

tap,tap,tap till its level then pour

 

[pinks]

Thanks for in-put guys!! Sounds like BP shooting is not that different than Centerfire loading.....Consistancy!! :wink:

Perry

 

[Mark whiz]

Bingo pinks - consistancy IS the name of the game.