range visit results white hot pellets sw and sst

Modern Muzzleloading Forum

Help Support Modern Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

shrimpy50

Well-Known Member
*
Joined
Jul 8, 2009
Messages
101
Reaction score
0
i shot an ok 2" group, just a hair over. 3 shots at 100 yards . group was 2 inches high then the flyer went a little more than tat. i may have caused the flyer, so i am not doing any more shooting until my Bellm pin gets here. the shock waves had the same poi, but were hard to load, even though they are super glides. i guess i will stay with the sst low drag bullets.
 
one more thing

i completely cleaned the barrel the night before and lapped the barrel for 100 strokes, replacing the compound every 50 strokes
 
This is roughly doing the samething as shooting the rifle to break in the barrel. TC use to say that at least 50 shots were needed to break in their inline barrels.
 
It takes a long time to break in a barrel,shooting sabots in the barrel. Try some full bore conical bullets,or lap the bore some. Some guns come with rough bores. Ron
 
Back
Top