- Joined
- Mar 31, 2008
- Messages
- 3,500
- Reaction score
- 3
Some pre-production Thor II Black Thors came in today for inspection. They are basically a .500" thor with Graphite around the base that increases bullet size to .504-.505" It will allow one bullet for pretty much all the modern inlines out there.
I won't be able to shoot them in the Accura until tuesday-Wednesday but when i do, i will push them with 100gr BH209.
My Accura takes the normal .500" thor. I loaded one of these black thors up when i got them and i used my rotoloader 5 in 1 tool and pushed the bullet in with my fingers until it stopped, then popped it with the tool and pushed it on top of the Blackhorn. I felt that it loaded smoother going down with the graphite on the bullet.
I won't be able to shoot them in the Accura until tuesday-Wednesday but when i do, i will push them with 100gr BH209.
My Accura takes the normal .500" thor. I loaded one of these black thors up when i got them and i used my rotoloader 5 in 1 tool and pushed the bullet in with my fingers until it stopped, then popped it with the tool and pushed it on top of the Blackhorn. I felt that it loaded smoother going down with the graphite on the bullet.